MANUFACTURED IN THE USA   /   SHIPPING NATIONWIDESALES & PROJECT SUPPORT   (951) 403-5738
A row of gray electrical cabinets beneath overhead cables along an industrial corridor.
AMERICAN BUILT   /   CALIFORNIA SERVED

Voltage Transformer

A voltage transformer provides an instrument-level representation of system voltage so compatible meters and protective relays can monitor electrical conditions.

NEW SWITCHGEAR / AMERICAN COMPONENTS / BUILT TO SPEC01 — CALIFORNIA + NATIONWIDE
01
Made in the USAAmerican manufacturing
02
UL 891 switchboardsLow-voltage assemblies, as applicable
03
Short lead timesSchedule confirmed with quote
04
Nationwide shippingServing California & beyond
BUILT AROUND YOUR PROJECT / 01

What a Voltage Transformer Does

A voltage transformer (VT), also called a potential transformer (PT), is an instrument transformer that reproduces a power-system voltage at a reduced, proportionate level. Its primary winding connects to the circuit being monitored; its secondary winding supplies a scaled voltage to instruments, meters, or protective relays. This allows those devices to work with a manageable signal rather than being connected directly to the system voltage. The transformer is intended to represent voltage for measurement or protection, not to supply ordinary building loads. The relationship between primary and secondary voltage is described by the turns ratio, but practical accuracy also depends on the device’s specified performance and the conditions of use. In switchgear, a VT can support voltage indication, metering, and functions such as voltage-based relay logic. Its exact role depends on the one-line diagram and protection scheme.

How It Differs from Other Transformers

A VT differs from a power transformer in purpose and application. A power transformer transfers energy to serve loads, while an instrument VT provides a representative signal to monitoring and protection equipment. It also differs from a current transformer (CT): a CT reproduces current, whereas a VT reproduces voltage. The distinction matters when reviewing drawings, wiring, and relay inputs because the devices have different connection practices and safety considerations. VTs may be used in single-phase or three-phase measurement arrangements, with primary and secondary connections selected for the system and the intended functions. Grounding, fusing, secondary circuit arrangement, and the treatment of unused windings are design considerations, not details to assume from the device name alone. Qualified electrical professionals should determine the appropriate installation and protection approach using applicable codes and project requirements.

THE DETAILS THAT DRIVE THE BUILD
Project specifications to define with your quote
SystemVoltage, phase, current and available fault current
ConfigurationLineup, protection, controls and enclosure as specified
ComplianceApplicable standards and listing confirmed for the assembly
DeliveryCalifornia and nationwide; schedule confirmed by quote

Ratio, Accuracy, and Burden

Selecting a VT begins with the system voltage and the voltage expected by connected instruments or relays. The specified ratio must produce a compatible secondary signal while supporting the intended measurement and protection functions. Accuracy is important: metering may call for dependable representation across a stated operating range, while protective relays need a usable signal under the conditions relevant to their settings and coordination. The connected secondary load, commonly called burden, includes instrument inputs and wiring; excessive burden can affect performance. Engineers should review accuracy class or equivalent performance specifications, burden, frequency, insulation requirements, and the device’s applicable ratings together. They should also account for system grounding and whether the circuit is phase-to-ground or phase-to-phase. These inputs help prevent a nominally suitable ratio from being paired with an unsuitable connection or operating duty.

Applications in Switchgear and Protection

In switchgear, voltage-transformer signals can support operator metering, voltage presence indication, power measurement, and relay functions such as undervoltage, overvoltage, synchronism check, or directional protection where the protection design requires voltage inputs. A VT does not determine whether those functions are appropriate; the system study, operating philosophy, and relay settings do. Coordination with CTs, relays, control wiring, and the switchgear arrangement is therefore essential. Drawings should identify the source and point of connection, phase relationships, primary and secondary connections, grounding, fusing or other protection, and terminal references. For retrofit or replacement work on a customer’s own equipment, field conditions and existing documentation should be checked before selecting a device or planning changes. A qualified professional should verify that the resulting signal, wiring, and protection scheme are suitable for the specific installation.

Information to Confirm Before Specification

When requesting or reviewing a switchgear design, provide the system nominal and maximum voltage, frequency, grounding method, one-line diagram, and the VT’s intended metering or protection functions. Identify required ratios, accuracy or performance needs, connected burden, connection configuration, insulation and environmental conditions, and any project-specific codes or standards. State relay and meter models or input requirements when known, and describe space, access, and wiring constraints that may affect the arrangement. For medium- or high-voltage equipment, identify the standards applicable to that specific equipment and verify the requirements for the project; a general VT definition does not establish a rating, approval, or listing. The manufacturer and project team can then review the inputs, clarify open design questions, and determine what configuration is appropriate. Final protection, ratings, and code decisions belong with qualified professionals responsible for the installation.

READY WHEN THE PROJECT IS

Let's get power moving.

From the first specification to the final shipment, start with a conversation about your project.

REQUEST A QUOTE