MANUFACTURED IN THE USA   /   SHIPPING NATIONWIDESALES & PROJECT SUPPORT   (951) 403-5738
Gray electrical equipment with meters and breakers inside an open enclosure.
AMERICAN BUILT   /   CALIFORNIA SERVED

Transfer Switch

A transfer switch moves a load connection from one power source to another. Its role, operating method and coordination depend on the electrical system it serves.

NEW SWITCHGEAR / AMERICAN COMPONENTS / BUILT TO SPEC01 — CALIFORNIA + NATIONWIDE
01
Made in the USAAmerican manufacturing
02
UL 891 switchboardsLow-voltage assemblies, as applicable
03
Short lead timesSchedule confirmed with quote
04
Nationwide shippingServing California & beyond
BUILT AROUND YOUR PROJECT / 01

What a Transfer Switch Does

A transfer switch is an electrical device or assembly that changes a load’s connection from one power source to another. A common arrangement uses a normal source, such as utility service, and an alternate source, such as a generator. When the normal source is unavailable or outside acceptable conditions, the transfer function allows selected loads to be supplied from the alternate source, subject to the system design. When normal power returns, the load may be transferred back according to the chosen operating sequence. The device does not create power, and it does not by itself determine which loads are essential or how long backup operation can continue. Those outcomes depend on the source capacity, load characteristics, controls and protection. In project discussions, “transfer switch” may describe a standalone device or a function integrated into a larger power distribution arrangement, so the one-line diagram and equipment scope should clarify what is intended.

Open and Closed Transition

Transfer methods affect both continuity and the electrical relationship between sources. With open-transition operation, the connection to one source is opened before the connection to the other is closed. This break-before-make sequence avoids intentionally connecting the two sources together, but sensitive loads may experience a brief interruption. Closed-transition operation momentarily connects both sources during the changeover, requiring the sources and system controls to meet the conditions for safe parallel operation. That may require additional coordination with the utility and generator controls, and it is not appropriate for every project. Some systems use delayed or in-phase transition strategies to address load behavior or source conditions. The right method is not simply a preference for less interruption: engineers must consider source synchronization, fault contribution, grounding, protective-device coordination and utility requirements. State the required transition behavior early, then confirm that the complete system design supports it.

THE DETAILS THAT DRIVE THE BUILD
Project specifications to define with your quote
SystemVoltage, phase, current and available fault current
ConfigurationLineup, protection, controls and enclosure as specified
ComplianceApplicable standards and listing confirmed for the assembly
DeliveryCalifornia and nationwide; schedule confirmed by quote

Automatic and Manual Operation

A transfer switch can be operated manually or through automatic controls. In an automatic arrangement, sensing and control logic monitor defined source conditions and initiate a transfer sequence when programmed criteria are met. The sequence may include delays to avoid responding to a momentary disturbance, as well as return-to-normal logic after utility power is restored. Manual operation instead relies on an authorized operator following the equipment’s established procedure. Some installations combine automatic sensing with manual control or bypass functions, but the exact arrangement must be specified rather than assumed. Useful design inputs include which source conditions trigger transfer, whether start and stop signals are exchanged with a generator, acceptable interruption time, alarm and status points, and the intended response to control-power failure. Qualified professionals should establish operating procedures and determine appropriate safeguards. Clear control narratives help suppliers, installers and commissioning teams interpret the intended sequence consistently.

Relationship to Switchgear and Protection

Transfer equipment and switchgear have related but distinct roles. A transfer switch changes the source connected to a load; switchgear or switchboard equipment distributes power and may provide switching, isolation and overcurrent protection, depending on its design. A project may place transfer equipment in a distribution lineup, or use a separate assembly, but physical arrangement does not erase the need to define each function. Engineers should show source breakers or disconnects, load connections, grounding and neutral treatment, protective devices, interlocks and control wiring on coordinated drawings. Particular attention is needed where separately derived sources, generator neutral switching, multiple transfer points or selective coordination are involved. The applicable standards depend on the equipment type and installation; requirements for a low-voltage switchboard should not be casually applied to medium- or high-voltage apparatus. Identify the standards and codes relevant to the specific equipment, and verify ratings and protection with qualified professionals.

Information to Define the Application

To evaluate a transfer-switch application, provide a one-line diagram, nominal system voltage and frequency, source types and available fault-current information when known. Identify the loads to be transferred, their operating characteristics, required continuity, and whether they can be shed or sequenced. Include the desired transition method, automatic or manual control expectations, generator interface details, grounding arrangement and any site or utility constraints. The project team should also establish equipment location, environmental conditions, access and maintenance needs, and how the assembly interfaces with upstream and downstream distribution equipment. Ratings, enclosure details, controls and applicable standards are design matters to confirm for the particular installation, not assumptions based on the term “transfer switch.” Switchgear Builder California builds new switchgear in the USA with American components and supplies customers in California and nationwide. Share the project documents and operating requirements to discuss an appropriate equipment scope; schedule-sensitive options, if relevant, are subject to project review.

READY WHEN THE PROJECT IS

Let's get power moving.

From the first specification to the final shipment, start with a conversation about your project.

REQUEST A QUOTE