MANUFACTURED IN THE USA   /   SHIPPING NATIONWIDESALES & PROJECT SUPPORT   (951) 403-5738
A long row of gray Allen-Bradley control cabinets with black switch handles on pallets indoors.
AMERICAN BUILT   /   CALIFORNIA SERVED

Standalone Motor Control Centers

A dedicated motor-control lineup starts with a clear picture of the incoming source, connected motors and how the system will operate.

NEW SWITCHGEAR / AMERICAN COMPONENTS / BUILT TO SPEC01 — CALIFORNIA + NATIONWIDE
01
Made in the USAAmerican manufacturing
02
UL 891 switchboardsLow-voltage assemblies, as applicable
03
Short lead timesSchedule confirmed with quote
04
Nationwide shippingServing California & beyond
BUILT AROUND YOUR PROJECT / 01

Define the lineup’s role and boundaries

A standalone motor control center (MCC) groups motor-feeder equipment in a dedicated lineup rather than relying on a larger switchboard or integrated distribution assembly to provide that function. Begin by defining what the MCC will supply, where its electrical boundary begins and ends, and which loads remain elsewhere in the facility. That scope helps establish whether the lineup is intended for one process area, a building system or a broader operating zone. Identify the motors and driven equipment, their locations, and any interfaces with upstream distribution, automation or emergency-power systems. Also clarify whether the project is new construction, an expansion or a replacement of existing equipment; each case may affect available space, connections and transition planning. A one-line diagram, load schedule and equipment-room layout give the design team a useful starting point. Qualified electrical professionals should determine protection, ratings and applicable codes for the specific installation.

Size the source connection from project inputs

The source connection is not simply a choice between a few standard arrangements. Its design depends on the upstream supply, system voltage and frequency, available fault current, grounding method, expected loading and the characteristics of the motors served. Provide the source equipment identification and, where available, its short-circuit and protection information. Confirm whether the MCC will receive power from a dedicated feeder, transformer or another distribution assembly, and identify any planned source transfers or alternate supplies. These details help engineers evaluate incoming-device requirements, bus coordination and the effect of motor starting on the electrical system. The connection method, conductor entry direction and termination space should also be coordinated with the room layout and installation sequence. Do not select an interrupting rating or protection scheme from motor horsepower alone. The project’s electrical study, equipment data and applicable codes must support those decisions, with qualified professionals confirming the final design.

THE DETAILS THAT DRIVE THE BUILD
Project specifications to define with your quote
SystemVoltage, phase, current and available fault current
ConfigurationLineup, protection, controls and enclosure as specified
ComplianceApplicable standards and listing confirmed for the assembly
DeliveryCalifornia and nationwide; schedule confirmed by quote

Build a complete motor-feeder count

Count feeders from the intended operating scope, not only from the motors installed on day one. For each load, document motor horsepower or other nameplate data, voltage, full-load current, starting method, duty and the need for local or remote control. Note which motors are essential, which may operate together, and whether any are standby or spare loads. A feeder schedule that identifies direct-on-line starters, reduced-voltage starting, variable-frequency drives or other control needs gives the design team a more meaningful basis for lineup planning than a total count alone. Distinguish active feeders from provisions for future growth; an unused space is not automatically a complete future feeder. Reserve capacity may affect section arrangement, heat management, bus loading and the physical footprint. Confirm which control components, overload functions, disconnecting means and field interfaces are required for each motor application, and resolve unusual starting or process requirements before the equipment layout is finalized.

Coordinate controls, operation and installation

An MCC is part of a working process, so define how operators and control systems will interact with the motor feeders. Identify the required local controls, remote commands, status signals, interlocks, alarm points and communication interfaces, while separating confirmed requirements from options still under review. Clarify whether control wiring and network connections are furnished with the equipment or completed by others, and establish responsibility for field terminations and commissioning. Installation planning matters just as much: provide room dimensions, access paths, working clearances, environmental conditions, cable-entry preferences and any restrictions on moving equipment into position. Verify how incoming and outgoing conductors will be routed, including conduit or tray locations and termination access. For an expansion beside energized equipment, qualified personnel must plan isolation, work boundaries and safe installation procedures. Early coordination among electrical, controls, mechanical and construction teams can uncover conflicts before they become field changes, while leaving final safety decisions to the responsible professionals.

Prepare a package for design review

A focused information package helps turn a motor-control concept into a reviewable equipment design. Include the latest one-line diagram, motor list, feeder schedule, source data, site plan, room elevations and control narrative, along with the governing project specifications and applicable standards. Flag unresolved items clearly, such as final motor selections, future feeder count, network protocol or source fault-current data; explicit open questions are easier to manage than hidden assumptions. Ask the manufacturer to review the proposed lineup scope, source interface, feeder mix, control requirements and physical arrangement against those inputs. For medium- or high-voltage equipment, identify and verify the standards applicable to that specific equipment; requirements differ by equipment type and project. Establish the submittal review path and identify who approves electrical and control details. If the schedule is sensitive, discuss possible schedule-responsive options during project review, without treating timing as guaranteed. The next practical step is to align the equipment package with the project’s responsible design professionals before procurement.

READY WHEN THE PROJECT IS

Let's get power moving.

From the first specification to the final shipment, start with a conversation about your project.

REQUEST A QUOTE