MANUFACTURED IN THE USA   /   SHIPPING NATIONWIDESALES & PROJECT SUPPORT   (951) 403-5738
Close-up of tall gray switchgear cabinets with orange labels and visible breakers on wooden pallets.
AMERICAN BUILT   /   CALIFORNIA SERVED

Electrical Panelboards

Start with the circuits the panelboard must serve, then coordinate protective devices and installation space to shape a practical distribution layout.

NEW SWITCHGEAR / AMERICAN COMPONENTS / BUILT TO SPEC01 — CALIFORNIA + NATIONWIDE
01
Made in the USAAmerican manufacturing
02
UL 891 switchboardsLow-voltage assemblies, as applicable
03
Short lead timesSchedule confirmed with quote
04
Nationwide shippingServing California & beyond
BUILT AROUND YOUR PROJECT / 01

Map the Branch Circuits Before Choosing a Layout

A useful panelboard layout begins with a circuit schedule, not a cabinet dimension. Identify each load, its operating characteristics, the number of poles required, and whether it needs a dedicated branch circuit. Note expected demand, equipment start-up behavior, continuous operation, and any planned future loads. These details help distinguish a panelboard with a clear, balanced arrangement from one that leaves little room for later changes. Confirm the supply voltage, phase, and system configuration with the project design, and coordinate those inputs with the equipment served. Circuit count alone is not enough: a schedule with many small loads can have different distribution needs than one with fewer, higher-demand loads. Ask the engineer or electrical contractor to resolve incomplete or conflicting schedules early. A sound, coordinated circuit list gives the manufacturer a practical basis for discussing layout, protective-device positions, and the space required for installation and maintenance.

Coordinate Protective Devices with Load Requirements

Branch-circuit protective devices must be selected to suit the loads, conductors, and system conditions established by qualified professionals. Review the required device types and ratings against the applicable design documents rather than assuming that every circuit can use the same device. Motor loads, electronic equipment, sensitive controls, and other specialized applications may call for different coordination or protection considerations. Where selective coordination or continuity of service matters, the engineer should evaluate how branch devices relate to upstream protection and the system’s available fault current. The panelboard layout should make the specified devices workable together, while leaving clear identification for circuits and room for safe access. Provide the manufacturer with device schedules, relevant one-line diagrams, and any project-specific coordination requirements. Final protection decisions remain part of the project’s engineering and code review; a panelboard arrangement alone does not establish that a complete electrical system is adequately protected.

THE DETAILS THAT DRIVE THE BUILD
Project specifications to define with your quote
SystemVoltage, phase, current and available fault current
ConfigurationLineup, protection, controls and enclosure as specified
ComplianceApplicable standards and listing confirmed for the assembly
DeliveryCalifornia and nationwide; schedule confirmed by quote

Fit the Equipment to the Actual Installation Space

Available space is more than the panelboard’s nominal footprint. Confirm the intended mounting location, wall construction, working clearances, access path, door or cover swing, and the route for incoming and outgoing conductors. Check whether the installation is surface-mounted or recessed, and identify obstacles such as piping, structural members, adjacent equipment, or restricted ceiling and floor space. The location also affects how feeders enter and how branch circuits leave the enclosure, so indicate conductor entry preferences and field constraints on the project documents. A compact arrangement may conserve wall area but can make wiring, labeling, or future service more difficult if access is tight. Conversely, excess enclosure space may be impractical where electrical rooms are constrained. Share dimensioned plans, elevations, and photographs when available, then verify field measurements before finalizing the design. The goal is a layout that fits the site and remains serviceable.

Plan Capacity, Identification, and Future Changes

Reserve capacity deliberately rather than treating unused circuit positions as an automatic guarantee of future flexibility. Consider which additions are reasonably anticipated, whether they may require different protective devices, and how those loads could affect the panelboard’s overall design. A project team can weigh spare positions against enclosure size, cost, and the likelihood of later changes. Make circuit descriptions specific enough that installers and maintenance personnel can identify served equipment without decoding vague labels. Coordinate naming with the drawings and building documentation, especially where panels serve multiple areas or related systems. Also establish how the schedule will be updated when field conditions change; discrepancies between installed circuits and records can complicate troubleshooting and maintenance. Provide the expected spare-position strategy and labeling conventions with the circuit schedule. These decisions help the panelboard serve both initial occupancy and anticipated revisions without implying that every future load can be accommodated without further engineering review.

Prepare Project Inputs for a Coordinated Build

For a productive layout review, assemble the current one-line diagram, panel schedules, load information, specified supply characteristics, protective-device requirements, and dimensioned installation details. Identify applicable project standards and code requirements for qualified professionals to confirm, along with environmental conditions that may affect the installation. If the design is still developing, mark assumptions clearly and identify which items remain subject to approval; this helps prevent preliminary information from being mistaken for a final equipment specification. Switchgear Builder California manufactures new equipment in the USA using American components and supplies panelboards to customers in California and nationwide. Project scope, technical requirements, and schedule-sensitive or expedited options are reviewed for each request, with timing dependent on that review. Before ordering, confirm the final circuit schedule, device requirements, dimensions, connections, and documentation expectations with the project team. That practical check reduces avoidable revisions and aligns the equipment layout with the installation.

READY WHEN THE PROJECT IS

Let's get power moving.

From the first specification to the final shipment, start with a conversation about your project.

REQUEST A QUOTE