MANUFACTURED IN THE USA   /   SHIPPING NATIONWIDESALES & PROJECT SUPPORT   (951) 403-5738
Close-up of tall gray switchgear cabinets with orange labels and visible breakers on wooden pallets.
AMERICAN BUILT   /   CALIFORNIA SERVED

120/240 Volt Metering Switchboards

Define the service configuration, metering approach and utility criteria before specifying a 120/240 V metering switchboard.

NEW SWITCHGEAR / AMERICAN COMPONENTS / BUILT TO SPEC01 — CALIFORNIA + NATIONWIDE
01
Made in the USAAmerican manufacturing
02
UL 891 switchboardsLow-voltage assemblies, as applicable
03
Short lead timesSchedule confirmed with quote
04
Nationwide shippingServing California & beyond
BUILT AROUND YOUR PROJECT / 01

Identify the 120/240 V system configuration

The label 120/240 V does not, by itself, establish how a service is configured. A common arrangement is single-phase, three-wire split-phase service, with two ungrounded conductors and a grounded neutral conductor. Another project may use a 120/240 V three-phase, four-wire delta arrangement, which has three phase conductors and a neutral, with different phase-to-neutral voltage relationships. These systems are not interchangeable, and their metering, bus, and protective-device requirements can differ substantially. Confirm the source and intended service arrangement with the serving utility and the project electrical design documents before selecting a switchboard layout. Provide the nominal voltage, phase, frequency, wire count, grounding approach, and available fault-current information when known. If records conflict or the service is being changed, resolve the discrepancy with the engineer and utility rather than relying on a voltage label alone. Clear identification at the outset prevents mismatched meter provisions and helps reviewers assess whether the proposed equipment suits the actual service.

Resolve meter sockets and compartments with the utility

Metering provisions are often governed by the serving utility’s service requirements, not solely by the equipment specification. Confirm whether the utility expects individual meter sockets, a meter compartment, instrument-transformer metering, a particular meter position, or another arrangement for the project. Requirements may vary with service size, customer count, service configuration, and local utility practice. Ask the utility for current metering diagrams and construction criteria, and determine who reviews or approves the proposed arrangement before equipment is released for manufacture. Record requirements for socket type, bypass provisions, sealing access, compartment dimensions, meter orientation, and separation from other sections where applicable. These are design inputs to verify, not assumptions that can be made from the nominal voltage. Coordinate ownership boundaries and access needs as well: utility personnel may need access to metering areas, while the customer’s equipment and operations must remain appropriately arranged. Early coordination can reveal a required layout change before it affects switchboard dimensions, feeder routing, or installation planning.

THE DETAILS THAT DRIVE THE BUILD
Project specifications to define with your quote
SystemVoltage, phase, current and available fault current
ConfigurationLineup, protection, controls and enclosure as specified
ComplianceApplicable standards and listing confirmed for the assembly
DeliveryCalifornia and nationwide; schedule confirmed by quote

Match conductor arrangement to metering and distribution

The conductor arrangement determines how the service is measured and distributed, so describe it precisely on the one-line diagram and equipment schedule. For split-phase service, the neutral serves 120 V loads from either line conductor, while 240 V loads are connected line to line. A three-phase, four-wire delta service includes a third phase conductor; depending on the specific arrangement, one phase-to-neutral voltage may differ from the others. That distinction affects load assignment, meter configuration, and the selection and placement of equipment intended for the service. Identify which loads are line-to-neutral and line-to-line, whether the neutral is required throughout the switchboard, and how grounding and bonding are addressed in the design. Confirm phase identification and utility conventions rather than applying a generic color or connection assumption. The engineer should assess phase loading, neutral loading, and the distribution of single- and three-phase loads. Accurate conductor details help the manufacturer develop a layout consistent with the drawings and give the utility and installer a basis for reviewing connections.

Verify ratings and applicable requirements

A complete specification should distinguish nominal system voltage from the equipment ratings needed for the installation. Have qualified professionals determine the required voltage rating, continuous current, short-circuit or withstand rating, and interrupting ratings for associated protective devices, using project conditions and applicable codes. Available fault current, overcurrent-device coordination, service conditions, and future load plans can influence these selections. Do not treat a 120/240 V designation as confirmation that a particular switchboard rating is adequate. State the service and feeder currents, anticipated load, source characteristics, and any known fault-current data for technical review, then verify proposed ratings against the final design and utility information. Identify standards and code requirements applicable to the specific equipment and jurisdiction. Where a particular rating or construction requirement is essential, make it explicit in the inquiry and confirm it during submittal review. Ratings and protection are project-specific design matters; a qualified engineer or other responsible professional must evaluate them for safe coordination.

Prepare a coordinated specification package

A useful request package combines the electrical requirements with the utility’s metering criteria. Include the current one-line diagram, service type, phase and wire count, system grounding information, service and feeder ratings, load data, available fault current, protective-device requirements, and the desired metering layout. Attach utility standards or written direction, noting any open approval items. Show the number of meters and service positions, the intended allocation of loads, and space or access constraints at the installation. Identify environmental conditions, enclosure requirements, cable entry direction, and applicable site or code requirements for review. Ask the manufacturer to identify assumptions, unresolved inputs, and drawing details requiring confirmation; review the resulting submittals with the engineer, contractor, and utility before fabrication. Switchgear Builder California builds new switchgear in the United States with American components and supplies customers in California and nationwide, subject to project review. If schedule-sensitive options matter, raise that concern early for review without presuming a specific delivery date. A coordinated package supports a clearer design review and reduces avoidable changes.

READY WHEN THE PROJECT IS

Let's get power moving.

From the first specification to the final shipment, start with a conversation about your project.

REQUEST A QUOTE