MANUFACTURED IN THE USA   /   SHIPPING NATIONWIDESALES & PROJECT SUPPORT   (951) 403-5738
A long row of gray Allen-Bradley control cabinets with black switch handles on pallets indoors.
AMERICAN BUILT   /   CALIFORNIA SERVED

Feeder Switchgear

Configure each feeder around its load, isolation strategy, protection requirements and the operating conditions of the distribution system.

NEW SWITCHGEAR / AMERICAN COMPONENTS / BUILT TO SPEC01 — CALIFORNIA + NATIONWIDE
01
Made in the USAAmerican manufacturing
02
UL 891 switchboardsLow-voltage assemblies, as applicable
03
Short lead timesSchedule confirmed with quote
04
Nationwide shippingServing California & beyond
BUILT AROUND YOUR PROJECT / 01

Define the Feeder’s Role in the Distribution System

Feeder switchgear is part of a larger power-distribution arrangement, so begin with the job each outgoing circuit must perform. Identify the source, downstream equipment and intended load for every feeder, including motors, transformers, panels or other distribution equipment. Record normal and expected operating conditions, load characteristics, and any known starting or inrush behavior. These details help distinguish feeders that may appear similar on a one-line diagram but impose different electrical and operational demands. Note whether the design includes spare or future circuits, and clarify which spaces are intended for immediate use versus later expansion. A spare position still affects enclosure layout, bus planning and project documentation; it should not be treated as an unspecified opening. Review the one-line diagram alongside load schedules and equipment data, resolving inconsistencies before design proceeds. A clear feeder schedule gives the manufacturer and project team a practical basis for discussing arrangement, circuit identification and protection requirements.

Coordinate Protective Devices With System Conditions

Select feeder protective devices in the context of the complete electrical system, not by load current alone. The engineering team should evaluate available fault current, conductor ampacity, downstream equipment limits, grounding method and the protective devices upstream and downstream. Time-current coordination and selective coordination goals can influence device type, trip functions and settings, but the appropriate approach depends on the project’s study results and applicable requirements. Consider whether a feeder supplies a motor or transformer, where starting current or energization inrush may affect protection choices. Also establish who will provide final settings, how those settings will be documented and whether field testing or commissioning is part of the project scope. Qualified professionals determine protection, ratings and applicable codes for each installation. Provide study assumptions and relevant equipment data early, then confirm that the proposed feeder arrangement can accommodate the required devices and connection details. Device selection and settings remain project-specific design decisions.

THE DETAILS THAT DRIVE THE BUILD
Project specifications to define with your quote
SystemVoltage, phase, current and available fault current
ConfigurationLineup, protection, controls and enclosure as specified
ComplianceApplicable standards and listing confirmed for the assembly
DeliveryCalifornia and nationwide; schedule confirmed by quote

Plan Isolation for Safe, Clear Operation

Isolation requirements should be defined feeder by feeder. Determine how operators or maintenance personnel are expected to separate a circuit, what equipment must remain energized, and whether the operating sequence creates constraints for adjacent feeders. The selected switching and isolation approach depends on the system voltage, equipment design, operating procedures and project requirements; do not assume that every feeder has the same means of isolation. Identify any interlocking, key control, indication or access expectations that need to be reviewed during design. Where circuits serve critical loads, discuss how maintenance affects continuity and whether alternate sources or transfer arrangements are handled elsewhere in the system. Clearly label the intended circuit destination and the associated disconnecting or protective device in drawings and schedules. Safe work practices and lockout/tagout procedures must be established by the responsible site team. Early discussion of isolation makes it easier to coordinate physical arrangement, operating access and documentation without treating a device feature as a substitute for established safety procedures.

Resolve Ratings, Layout and Connection Details

A useful request for feeder switchgear includes the electrical and physical information needed to develop a project-specific arrangement. Provide system voltage and frequency, phase and wire configuration, bus requirements, feeder quantities, anticipated circuit ratings, available fault-current information and the relevant design documents. Identify cable or busway entry direction, conductor material and size when known, lug or termination expectations, and any space or routing restrictions. Include room dimensions, access clearances and environmental conditions that may affect enclosure planning. Ratings and construction details must be reviewed against actual system conditions and applicable codes; values on preliminary schedules should be identified as provisional rather than presented as final. For low-voltage switchboards, confirm whether UL 891 applies to the project’s equipment and requirements; for medium- or high-voltage equipment, identify and verify the standards applicable to that specific equipment. Applicable standards and ratings require project review and do not, by themselves, establish a third-party listing.

Prepare a Complete Submittal and Review Package

A coordinated package helps reduce avoidable revisions and supports a productive design review. Send the current one-line diagram, feeder schedule, load information, protection study or assumptions, applicable specifications and relevant site constraints. Mark open decisions clearly, including pending fault-current values, future feeders, preferred device functions and any deviations from the project specification. Ask the manufacturer to identify information needed to develop the proposed arrangement, and review drawings for circuit naming, device designations, connection access and alignment with downstream equipment. Compare the submittal against the design documents rather than relying on a general description of the gear. Confirm responsibilities for final protection settings, field connections, inspection, testing and commissioning with the project team. Switchgear Builder California builds new equipment in the USA with American components and supplies customers in California and nationwide, subject to project review. If schedule-sensitive options matter, raise them early; feasibility and timing depend on the specific design and project conditions.

READY WHEN THE PROJECT IS

Let's get power moving.

From the first specification to the final shipment, start with a conversation about your project.

REQUEST A QUOTE